Coolice 3D Prints

Welcome to Coolice 3D prints web site

This site was created to showcase my custom designed and 3D printed parts that I create for use myself and allow for their purchase for use in your own projects.

Through my charge case builds I am building up a range of 3D printed designs rangeing from simple connector holder designs, through to more complex holders and while these help me greatly in my builds, I feel they may be of benefit to any DIY builders.
As I expand my case builds, so to does the designs I create to help me achieve the layout I am aiming for. So I will update the items as and when they are tried, tested and proven to work.

Another area is through my passion for RC model helicopters, for which I also use my 3D printers to create parts for them to allow the use of certain items or to allow for more room. As one example when I got hold of an OMP M2, I quickly saw the LiPo battery depth limitation and a quick and simple way to overcome this problem with a new under carriage mount design. So this is one design you will find here, along with various other options for receiver mounting at the rear of the model between the carbon frames. This also doubles as a rear UC mount to either match the front with the same amount of lift, to maintain the forward rake of the model lifting the tail rotor out of tall grass.
I started out with these for a 2019 M2, but have now developed a range to cover the new Explorer and 2020 M2 models.

I can also undertake custom design requests, so if there is something you need 3D printing give me a shout.